HP HSG Array Controller - Manual (Page 34)

Installing the Switch 2-15
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments: V1.6 OEM Source
Part Number: AA-RHBYA-TE 135267-001 File Name: c-ch2 Installing the Switch Last Saved On: 4/7/99 1:45 PM
Enter the IP Address of Your Switch
To enter an IP address you use the front panel display and the four buttons
under the display. (Refer to Chapter 3 for more information on managing the
Switch using the front panel.) After the Switch successfully completes POST,
proceed as follows:
1. Press the down-arrow button (far left button). The display shown
Configuration Menu.
2. Press the left-arrow button, far right button. This button is the enter
button. The display shows IP Address.
3. Press the enter button again. Use the right-arrow button to scroll through
the IP address. After you have selected “IP Address”, the up-arrow and
down-arrow buttons allow you to increment and decrement each numbic
entry.