HP HSG Array Controller - Manual (Page 52)

3-18 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
Open/Opened BB_credit
Pressing , while Open/Opened BB_credit is selected, displays:
Open/Opened BB_credit
4
The number is used to specifies the maximum number of R_RDY's an FL_Port
can issue (provided buffers are available) at the beginning of each loop
tenancy. Configuring a higher value allows NL_Ports to send out more frames
to the Fabric in a loop, and can increase performance especially in bigger
loops.
Frame Collection
Pressing , while Frame Collection is selected, displays:
Frame Collection
Method? Bundle/Piling
This command specifies two frame collection methods, bundle and piling.
Using bundling, frames are separated in different queues based on
source/destination pairs. Piling accumulates frame based on destination
AL_PA. Piling can minimize loop traffic by reducing overhead and increases
the loop efficiency.
To set, press for Bundle or for Piling.
Reset to Default
Pressing , while Reset to Default is selected, displays:
Reset to Default
Accept? Yes No
Selecting the Yes option then pressing causes all values in the
Configuration Menu to reset to default conditions. Once the Ethernet IP
address and the switchname are changed, they are not reset to default values.
NOTE: Resetting the Switch to default causes all configuration settings, names, and
passwords entered to be reset to default settings, except the IP address and switchname.