HP HSG Array Controller - Manual (Page 54)

3-20 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
Port Enable
Pressing while the Port Enable message is displayed opens a
submenu where you select the port.
Operation Menu:
Port Enable
Pressing , while the selected port is displayed, enables the selected
port. The LED associated with selected port changes from amber to green
indicating the port has been enabled. When FL_Ports are enabled, the port
initializes the loop attempting to be the master.
Close Telnet
Pressing while the Close Telnet Session message is
displayed opens a submenu where you select to close an open Telnet session.
Operation Menu:
Close Telnet Session
Pressing , while the Close Telnet Session message is
displayed closes the open Telnet session.
Close Telnet Session
Accept? Yes No
Reboot
Pressing while the Reboot message is displayed causes the Switch
to reboot immediately.
Operation Menu:
Reboot
Rebooting the Switch causes it to immediately exit all current processes and
states, and start the POST process. Exercise caution using the reboot command
on a Switch connected to the Fabric.
Pressing , while the screen above is selected, displays:
Reboot
Accept? Yes No