Spectra Precision ProMark 800 Reference Manual - Manual (Page 57)

45
Precise Surveying - Field Applications & Concepts
4. Points are automatically named (numeral suffix
automatically incremented) unless you wish to give a
particular name for each point.
5. Occupation time in fact defines the period of time for
which the post-processing software will average the
successive positions over this period of time. The resulting
averaged position will be assigned to the point.
Continuous
Kinematic Survey
Typical Use
Surveying Lines (Trajectories).
Key Points
1. The rover is moved along the line while raw data is being
logged. The rover antenna pole should be held continually
vertical throughout the observation.
Data collected at the base
Data collected by the rover
(Initialization)
(Start)
(Stop)
Rover
Baseline
Reference Point
Trajectory (Line)
Base
Observation Time
Log Interval