Spectra Precision ProMark 800 Reference Manual - Manual (Page 109)

97
Troubleshooting
111 High Option S has expired
The use of the [S] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
112 High Option P has expired
The use of the [P] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
113 High Option G has expired
The use of the [G] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
114 High Option M has expired
The use of the [M] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
115 High Option L has expired
The use of the [L] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
116 High Option N has expired
The use of the [N] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
117 High Option C has expired
The use of the [C] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
118 High Option R has expired
The use of the [R] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
192 Medium Baseline Out of Range
The receiver won’t use the received corrections data because the dis-
tance to the base station is greater than 3 kilometers. Work with a
closer station or buy the [K] firmware option (full RTK).
193 Medium
Extend Memory not avail-
able Trying to power on the extended memory, but found missing or unde-
tected.
194 Medium Option O has expired
The use of the [O] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
195 Medium Option Q has expired
The use of the [Q] firmware option was granted to you for a limited
period of time, which has now expired. Please contact to renew the
use of this option.
196 Medium Current Power not allowed
You are trying to assign a value of radiated power which the radio is
not allowed to transmit. Choose a lower value.
197 Medium Not enough space left
Not enough room to save the configuration file. Make room by deleting
unnecessary files.
198 Medium Config file already exists
You are trying to save a configuration file that already exists in mem-
ory. Move the existing file to another location before trying again.
199 Medium File not found
The receiver could not find the file you specified. Make sure the
receiver can find the configuration file it is expected to use.
200 Medium Incompatible Config File
The configuration file you want the receiver to run does not contain the
expected data. Upload a correct configuration file and delete the bad
one.
201 Medium Invalid Radio Type
You are trying to set a radio type that does not match the radio cur-
rently used by the receiver. Find the right type and try again.
# Rank Alarm Label Symptoms & Remedies