Spectra Precision ProMark 800 Reference Manual - Manual (Page 308)

296
Query Command Library
ELM: Elevation Mask
Function This command is used to read the current value of the
elevation mask. The elevation mask impacts data recording,
data output and satellite reception at the base.
Command Format Syntax
$PASHQ,ELM[*cc]
Response Format Syntax
$PASHR,ELM,d1*cc
Parameters
Example $PASHQ,ELM
$PASHR,ELM,5*29
Relevant Set
Command
$PASHS,ELM
See also $PASHQ,PEM
FIL,CUR: Information On G-File Being Recorded
Function This command allows you to read information about the G-file
currently being recorded.
Command Format Syntax
$PASHQ,FIL,CUR[*cc]
Response Format Syntax
General form:
$PASHR,FIL,CUR,s1,d2,s3,s4,d5*cc
If no G-file recording is in progress:
$PASHR,FIL,CUR,NONE*79
Parameter Description Range
d1 Current value of elevation mask, in degrees 0-90
*cc Checksum *00-*FF