Spectra Precision ProMark 800 Reference Manual - Manual (Page 388)

376
Query Command Library
Example
$PASHQ,SOM,WRN
$PASHR,SOM,WRN,ON,ON*42
Relevant Set
Command
$PASHS,SOM,WRN
See Also $PASHS,SOM
STI: Station ID
Function This command is used to query the receiver for the station ID
it transmits to the rover through the corrections message.
Command Format Syntax
$PASHQ,STI[*cc]
Response Format Syntax
$PASHR,STI,d*cc
Parameters
Example
$PASHQ,STI
$PASHR,STI,817*28
Relevant Set
Command
$PASHS,STI
SVM: Satellite Use Mask
Function This command is used to read the current setting of the
satellite use mask defining the maximum number of code or
Doppler observations used in the PVT calculation.
Parameter Description Range
d Station ID
0-1023 (RTCM 2.3)
0-4095 (RTCM 3.x)/ATOM
0-31 (CMR & CMR+)
*cc Checksum *00-*FF