Spectra Precision ProMark 800 Reference Manual - Manual (Page 220)

208
Set Command Library
OCC: Writing Occupation Data to Raw Data File
Function This command is used to write information about the current
occupation to the raw data file being logged.
Command Format Syntax
$PASHS,OCC,d1,d2,s3[,s4][*cc]
Parameters
Examples
Starting a static occupation on point “SITE01”:
$PASHS,OCC,0,0,SITE01,Park_Entrance*63
Ending the static occupation on point “SITE01”:
$PASHS,OCC,0,1,SITE01,Park_Entrance*62
Relevant Query
Command
$PASHQ,OCC
See also $PASHS,REC
$PASHS,ATM
Parameter Description Range
d1
Occupation type:
• 0: Static
• 1: Quasi-static
• 2: Dynamic
• 3: Event
• 4: On kinematic bar, 20 cm long
0-4
d2
Occupation event:
• 0: Begin
• 1: End
0-1
s3 Occupation name 255 characters max.
s4 Occupation description 255 characters max.
*cc Optional checksum *00-*FF