Spectra Precision ProMark 800 Reference Manual - Manual (Page 170)

158
Set Command Library
Parameters
Comments
When the GLONASS-only mode is activated
($PASHS,GPS,OFF and/or $PASHS,PGS,GLO), the following
messages are not generated: RTCM2.3, CMR, CMR+ and
DBEN.
Examples
Sending RTCM 3.0 message to the external UHF transmitter
via port A:
$PASHS,BAS,A,RT3*51
Sending RTCM 2.3 messages to the external UHF transmitter
via port D and CMR+ messages to the GSM modem via port E:
$PASHS,BAS,D,RT2,E,CMP*4E
Disabling the differential data output:
$PASHS,BAS,OFF*46
Relevant Query
Command
$PASHQ,BAS
See also $PASHS,CPD,MOD
$PASHS,RTC,TYP
$PASHS,RNX,TYP
$PASHS,CMR,TYP
Parameter Description Range
c1
First port ID:
• A: Serial port (default)
• C: Bluetooth port
• E: Modem
• M, U: Internal memory (M), USB key (U)
A, C, E, M, U
s2
Differential data type:
• RT2: RTCM 2.3 messages
• RT3: RTCM 3.0 & 3.1 messages (default)
• CMR: CMR messages
• CMP: CMR+ messages
• ATM: ATOM messages
• DBN: DBEN messages
RT2, RT3, CMR,
CMP, ATM, DBN
c3 Second port ID: same as c1 above A, C, E, M, U
s4 Differential data type: same as s2 above.
RT2, RT3, CMR,
CMP, ATM, DBN
*cc Optional checksum *00-*FF