Spectra Precision ProMark 800 Reference Manual - Manual (Page 245)

233
Set Command Library
Command Format Syntax
$PASHS,REC,c[*cc]
Parameters
Examples
Starting raw data recording:
$PASHS,REC,Y*54
Stopping raw data recording:
$PASHS,REC,N*43
Relevant Query
Command
$PASHQ,REC
See also $PASHS,MEM
$PASHS,ATM
$PASHS,NME
$PASHS,DRD
Parameter Description Range
c
Control character:
• Y: Yes. The receiver will immediately start
recording data. This option also enables data
recording at receiver power-up, i.e. recording will
start every time you turn the receiver on, even if
you stopped recording before the end of the pre-
vious session.
• N: No. The receiver will immediately stop record-
ing data. This option also disables data recording
at receiver power up, i.e. the receiver won’t
resume data recording when you next turn it on.
This is the default mode.
• S: Stop. The receiver will immediately stop
recording raw data. This option does not affect
the way the receiver operates at power-up.
• R: Restart. The receiver will immediately start
recording raw data. This option does not affect
the way the receiver operates at power-up.
Y, N, S, R
*cc Optional checksum *00-*FF