Firmware options – Spectra Precision ProMark 800 Reference Manual User Manual
Page 32

20
Introduction
Environmental
Characteristics
• Operating temperature: -30° to +60°C (-22° to +140°F)
• Storage temperature: -40° to +70°C (-40° to +158°F)
• Humidity: 100% condensing
• Waterproof, sealed against sand and dust
• Shock: ETS300 0.19
• Vibration: EN60945
Power
Characteristics
• Li-ion battery, 4600 mAh
• Battery life time: 8 hrs (GSM and UHF off)
• 6-28 VDC input
Optional System
Components
• Communication Modules:
– Pacific Crest UHF Rx
– GSM/GPRS/EDGE/3.5G quad-band
• Transmitter Kits
– Pacific Crest ADL radios
• Rechargeable battery kit
• Data collectors
– ProMark 120
–
Ranger 3
– Nomad™
– MM10
– T41
Firmware Options
The pre-installed and optional firmware modules are listed in
the table below.
ID
Label
Description
P/N
Pre-
installed
K
Unlimited
RTK
Allows a base to generate and send RTK
correction data.
Allows a rover to compute RTK position
solutions using corrections received from a
base.
680502 Yes
F
FASTOUT-
PUT
Allows position output at a rate of up to 20
Hz.
680527 Yes
Z
MODEM
Enables the use of the internal GSM/
GPRS modem
680528 Yes