Spectra Precision ProMark 800 Reference Manual - Manual (Page 201)

189
Set Command Library
Parameters
Example
Enabling GLONASS:
$PASHS,GLO,ON*1C
Relevant Query
Command
$PASHQ,GLO
See also $PASHS,SBA
$PASHS,CFG
$PASHS,GPS
$PASHS,GAL
GPS: GPS Tracking
Function This command is used to enable or disable GPS tracking.
Enabling GPS tracking will power on the corresponding part
in the RF section, if not powered on yet.
Conversely, disabling GPS tracking will power off the
corresponding part in the RF section, unless Galileo and
SBAS reception requires that this part be kept in use.
Important! Combined with $PASHS,CFG, this command
makes command $PASHS,GNS,CFG obsolete.
Command Format Syntax
$PASHS,GPS,ON[,s1[,s2[,s3]]][*cc]
$PASHS,GPS,OFF[*52]
Parameter Description Range Default
s1
Enables (ON) or disables (OFF) GLONASS
tracking.
ON, OFF ON
*cc Optional checksum *00-*FF