Spectra Precision ProMark 800 Reference Manual - Manual (Page 211)

199
Set Command Library
Parameters
Example
Setting port A to RS422:
$PASHS,MDP,A,422
Relevant Query
Command
$PASHQ,MDP
See also $PASHS,PRT
$PASHS,CTS
MEM: Selecting Memory Device Used
Function This command is used to select the memory used by the
receiver for data storage.
Command Format Syntax
$PASHS,MEM,d[*cc]
Parameters
Example
Selecting internal memory as the memory used by the
receiver:
$PASHS,MEM,0*2C
Relevant Query
Command
$PASHQ,MEM
Parameter Description Range Default
c Port setting (RS232 or RS422) 232, 422 232
*cc Optional checksum *00-*FF
Parameter Description Range Default
d
Memory used:
• 0: Internal memory (NAND Flash)
• 2: USB mass storage key
0, 2 0
*cc Optional checksum *00-*FF