Spectra Precision ProMark 800 Reference Manual - Manual (Page 272)

260
Query Command Library
See also $PASHQ,ANR
ANP: Antenna Parameters
Function This command allows you to read the antenna parameters of
the specified antenna name, or of the complete antenna
database if no antenna name is specified.
Command Format Syntax
$PASHQ,ANP[*cc]
or
$PASHQ,ANP,s1[*cc]
Parameters
Response Formats (Through examples)
$PASHQ,ANP
LIST OF PREDEFINED ANTENNAS (d1):
ANT1 ANT2
ANT3 ANT4
…
LIST OF USERDEFINED ANTENNAS (d2):
ANT10 ANT11
ANT12 ANT13
…
OWN ANTENNA: ASH802147
REFERENCE ANTENNA: UNKNOWN
OUT ANTENNA: NULLANTENNA
RECEIVED ANTENNA: ASH802147
(Where d1 is the number of predefined antennas and d2 is the number of user-
defined antennas.)
$PASHQ,ANP,ASH802147
ASH802147
L1 N:+000.30 E:+002.20 U:+104.00
L1 PAE:+000.0 +000.9 +001.9 +003.1 +004.4 +005.5 +006.4 +007.2 +007.6
+007.7
+007.4 +006.7 +005.5 +004.1 +002.2 +000.0 -002.3 +000.0 +000.0
L2 N:-002.10 E:-001.00 U:+100.10
L2 PAE:+000.0 -000.3 +000.0 +000.6 +001.5 +002.4 +003.2 +003.9 +004.3
+004.4
Parameter Description Range
s1 Antenna name (case sensitive) 31 characters max.
*cc Optional checksum *00-*FF