Spectra Precision ProMark 800 Reference Manual - Manual (Page 280)

268
Query Command Library
Relevant Set
Command
$PASHS,ATM
See also $PASHQ,ATM
$PASHQ,ATO
ATO: ATOM Message Output Settings
Function This command allows you to read the different parameters of
the ATOM message, as currently set on the specified port or
memory. The receiver will return the response on the port
through which the query command is sent.
Command Format Syntax
$PASHQ,ATO,c[*cc]
BAUD
If serial port used, then baud rate
If memory used, “0” if not available, else “1” 0-15 (see table
below)
Code Baud Rate Code Baud Rate
0 300 8 57600
1 600 9 115200
2 1200 10 230400
3 2400 11 480600
4 4800 12 921600
5 9600 13 1428571
6 19200 14 2500000
7 38400 15 5000000
Parameter Description Range