Spectra Precision ProMark 800 Reference Manual - Manual (Page 156)

144
Set Command Library
ANH: Antenna Height
Function This command allows you to enter the antenna height . If not
specified, the height measurement type is set to “Vertical”.
Command Format Syntax
$PASHS,ANH,f1[,c2][*cc]
Parameters
Examples
Entering the vertical measurement (2 m) of a rover antenna:
$PASHS,ANH,2.000
Entering the slant measurement (1.543 m) of a base
antenna:
$PASHS,ANH,1.543,S
Comments
When you enter an antenna height greater than 6.553 m, be
aware this will NOT be the value of antenna height broadcast
through RTCM messages and the one saved to the G-file.
Instead, a fixed value of 6.553 meters will be provided.
Relevant Query
Command
$PASHQ,ANH
See also $PASHS,ANR
ANP,PCO & ANP,EDx: Creating/Editing Antenna Definitions
Function These commands allow you to create or modify antenna
definitions. The definition of an antenna includes a name for
Parameter Description Range
f1 Antenna height.
0-6.553 m
6.553-100 m
c2
Antenna height measurement type:
• V: Vertical measurement
• S: Slant measurement
V, S
*cc Optional checksum *00-*FF