Spectra Precision ProMark 800 Reference Manual - Manual (Page 265)

253
Set Command Library
USR,TYP: Defining User Message Type
Function: This function is used to set the type of user message the
receiver will generate after the “USR” NMEA-like message
has been enabled.
Command Format Syntax
$PASHS,USR,TYP,s[*cc]
Parameters
Example
Defining a “GGA” user message type:
$PASHS,USR,TYP,GGA
Relevant Query
Command
$PASHQ,USR,TYP
See Also $PASHS,NME
$PASHS,USR,TXT
$PASHS,USR,POS
USR,TXT: Entering text for User Message Type “TXT”
Function: This function is used to enter the text that will be inserted
into the “TXT” user message, as defined through
$PASHS,NME (command run with s1= USR) and
$PASHS,USR,TYP (command run with s= TXT).
Parameter Description Range Default
s
Requested user message type:
• TXT: text message type. The inserted text
is the one you define using command
$PASHS,USR,TXT.
• GGA: GGA message type. The inserted
position is the one you define using com-
mand $PASHS,USR,POS.
TXT,GGA TXT
*cc Optional checksum *00-*FF