Spectra Precision ProMark 800 Reference Manual - Manual (Page 365)

353
Query Command Library
RDP,TYP: Radio Type Used
Function This command is used to query the type of radio used on the
specified port.
Command Format Syntax
$PASHQ,RDP,TYP,c1[*cc]
Parameters
Response Format Syntax
$PASHR,RDP,TYP,c1,s2*cc
Parameters
Example
If an internal PDL radio receiver is used:
$PASHQ,RDP,TYP,D
$PASHR,RDP,TYP,D,PDL*5F
Parameter Description Range
c1 Serial port used to communicate with the radio A, D
*cc Optional checksum *00-*FF
Parameter Description Range
c1
The port ID you specified in the command is
replicated in this field
A, D
s2
Radio type:
• UNKNOWN: Auto-detection
• NONE: No radio
• PDL: Pacific Crest
• Internal (port D): PDL RXO
• External (port A): PDL HPB/LPB
• ADL: Pacific Crest
• Internal (port D): ADL RXO
• External (port A): ADL Vantage
• External (port A): ADL Vantage Pro
• MGL: Radio transmitter P/N 800986
• XDL: Pacific Crest XDL Rover
• MDL: U-Link
• LFE: License-free radio, Europe
• LFA: License-free radio, North America
UNKNOWN, PDL,
ADL, XDL, MGL,
MDL, LFE, LFA,
NONE
*cc Checksum *00-*FF