Spectra Precision ProMark 800 Reference Manual - Manual (Page 339)

327
Query Command Library
Parameters
Example
$PASHQ,NPT
$PASHR,NPT,0,0*3E
Relevant Set
Command
$PASHS,NPT
NTR: NTRIP Settings
Function This command is used to read the current NTRIP settings.
When c6 is omitted in the query command, the returned
NTRIP settings are those for the port defined through the
$PASHS,NTR,PAR command last run.
Command Format Syntax
$PASHQ,NTR[,c6][*cc]
Response Format Syntax
$PASHR,NTR,ADD=s1,PRT=d2,LGN=s3,PWD=s4,TYP=d5*cc
Parameter Description Range
d1
Code assigned to SBAS differential position solution in
NMEA-like messages (CRT, DCR, DPO, POS, VEC):
• 0: Code “1”
• 1: Code “9”
0,1
d2
Code assigned to SBAS differential position solution in
NMEA messages (GGA):
• 0: Code “2”
• 1: Code “9”
0, 1
*cc Optional checksum *00-*FF