Charging batteries before use, Screen backlight, Data transfer screen – Spectra Precision ProMark 800 Reference Manual User Manual
Page 27: Removing the battery from the promark 800

15
Introduction
Memory
Management
Screen
From the ATL Recording screen, press the Scroll button to
access the Memory Management screen. The flowchart
below summarizes the different tasks you can perform at this
point in the management of the receiver memory.
Screen Backlight
The screen backlight is automatically turned off if no key is
pressed for 1 minute. When the backlight is off, a short press
on the Scroll button will turn it back on. The Scroll button will
then recover its usual functions.
Data Transfer
Screen
For more information on the screen displayed when
downloading files, refer to Downloading Raw Data
on page
Charging Batteries Before Use
Make sure the battery is fully charged for each ProMark 800
you will be using in the field. Follow the instructions below to
charge a battery.
Removing the
Battery from the
ProMark 800
Unless the battery has already been taken out, do the
following:
• Put the ProMark 800 upside down.
Clean up
internal
memory?
Delete
all G-files?
Delete
all files?
Format
memory?
Yes
Yes
Yes
No
No
Yes
No
No
Back to General Status Screen
ATL Recording Screen
Scroll button
Confirm?
Yes
No
In progress...