Spectra Precision ProMark 800 Reference Manual - Manual (Page 353)

341
Query Command Library
Parameters
Example
$PASHQ,PRT,A
$PASHR,PRT,A,6*55
Relevant Set
Command
$PASHS,PRT
See also $PASHQ,CTS
$PASHQ,MDP
PTT: PPS Time Tag
Function This command asks for the PPS time tag message to be
output on the specified port, or on the port on which the
query is made if no port is specified.
Command Format Syntax
$PASHQ,PTT[,c1][*cc]
Parameters
Response Format Syntax
$PASHR,PTT,d1,m2*cc
Parameter Description Range
c1
ID of port for which baud rate
setting is returned.
A, C, D, E
d2 Baud rate code 0-15 (see table below)
*cc Checksum *00-*FF
Code Baud Rate Code Baud Rate
0 300 7 38400
1 600 8 57600
2 1200 9 115200
3 2400 10 230400
4 4800 11 460800
5 9600 12 921600
6 19200 13 1428571
Parameter Description Range
c1 Port ID
*cc Optional checksum *00-*FF