Spectra Precision ProMark 800 Reference Manual - Manual (Page 192)

180
Set Command Library
Command Format Syntax
$PASHS,DIP,PAR,ADD,s1,PRT,d2[,LGN,s3,PWD,s4][*cc]
Parameters
Comments
When connecting to the specified server requires a user name
and password, then the receiver will send the serial command
$GPUID,s3,s4 after the IP connection with the server has
been established.
Examples
Entering the parameters of the server the receiver has to
connect to (through an IP address):
$PASHS,DIP,PAR,ADD,192.65.54.1,PRT,2100*74
Entering the parameters of the server the receiver has to
connect to (through a host name):
$PASHS,DIP,PAR,ADD,www.MyRec.com,PRT,2100*05
Relevant Query
Commands
$PASHQ,DIP
$PASHQ,MDM
See Also $PASHS,DIP,ON
$PASHS,DIP,OFF
$PASHS,MDM
DRD: Data Recording Duration
Function This command sets a duration for all the G-files that the
receiver will log (outside of sessions). When a duration is set,
the receiver automatically creates a new G-file right after the
currently logged G-file has reached the specified duration.
Parameter Description Range Default
ADD,s1
IP address or host name of
external server
32 characters max.
PRT,d2 IP port of external server 0-65535
LGN,s3 User name (optional) 32 characters max.
PWD,s4 Password (optional) 32 characters max.
*cc Optional checksum *00-*FF