Spectra Precision ProMark 800 Reference Manual User Manual
Page 127
115
Miscellaneous
The following messages will appear in succession:
Analyzing File...
Loading PM_
At the end of the upload procedure, the receiver will be re-
booted automatically. Disconnect the USB key from the
receiver and let the receiver re-boot.
NOTE: There is another way of uploading a configuration to a
receiver, which is to use the $PASHS,PAR,LOD command,
whether the configuration file (a PAR file) is present on the
connected USB key or in the receiver’s internal memory. See
PAR,LOD: Configuring the Receiver From a PAR File on
page
“Upload Script?”
Procedure
When the message below appears on the screen, press the
Log button to start the upload script procedure:
The receiver will start executing the script of commands. For
more information on this procedure, see Running Serial
Commands from a USB Key on page 136.
Copying User Data
When the message below appears on the screen, press the
Log button to start copying the files to the USB key:
Note that the procedure will be aborted from the start (not a
single file copied) if the free memory space on the USB key
is found less than the total size of files to be copied.