Spectra Precision ProMark 800 Reference Manual - Manual (Page 169)

157
Set Command Library
Parameters
Example
Setting to ATOM V2:
$PASHS,ATM,VER,2*5E
Relevant Query
Command
$PASHQ,PAR
See also $PASHS,ATM
BAS: Differential Data Type
Function This command is used in a base to select the type of
differential data the base should generate and the port, or two
ports, through which this data should be routed.
The command can also be used with the OFF operator to
disable the output.
Command Format Syntax
$PASHS,BAS,c1,s2[,c3,s4][*cc]
or, to disable the differential data output:
$PASHS,BAS,OFF[*cc]
Parameter Description Range Default
d
Index of ATOM version:
• 1: ATOM V1
• 2: ATOM V2
1, 2 2
*cc Optional checksum *00-*FF -