Spectra Precision ProMark 800 Reference Manual - Manual (Page 247)

235
Set Command Library
Example
Choosing scenario 4 with 1 sec and 30 sec for the output
rates:
$PASHS,RNX,TYP,4,1,30*6A
Relevant Query
Command
$PASHQ,RNX,MSI
See Also $PASHS,BAS
$PASHS,CPD,MOD,BAS
RST: Default Settings
Function This command is used to reset the receiver parameters to
their default values.
Command Format Syntax
$PASHS,RST[*cc]
Parameters
None.
Example
Resetting the receiver:
$PASHS,RST*20
101
L1&L2 compact pseudo-range and compact carrier phase, extended
fixed position follows every 12 epochs, all the data are decimated in 5
times compared to L1 carrier phase. This scenario cannot be used
with a moving receiver.
201
Same as scenario 1, but extended computed reference position fol-
lows each epoch.
202
Same as scenario 2, but extended computed reference position fol-
lows each epoch.
203
Same as scenario 3, but extended computed reference position fol-
lows each epoch.
204
Same as scenario 4, but extended computed reference position fol-
lows each epoch.
300
Same as scenario 100, but extended computed reference position fol-
lows each epoch.
Scenario
Number
Description