Spectra Precision ProMark 800 Reference Manual - Manual (Page 344)

332
Query Command Library
OPTION: Installed Receiver Firmware Options
Function This command is used to list the firmware options currently
installed in the receiver. The returned message includes one
response line per installed option.
Command Format Syntax
$PASHQ,OPTION[*cc]
Response Format Syntax
$PASHR,OPTION,c1,s2,h3*cc
Parameters
Example
$PASHQ,OPTION
$PASHR,OPTION,0,SERIAL,NUMBER,200751223*7A
Parameter Description Range
c1 Option ID (See table below)
s2 Option label
h3 Hexadecimal unlock code 13 characters max.
*cc Checksum *00-*FF
Option ID Label Description
#
REGISTRATION
CODE
Registration code, depends on the firmware
version, required to activate the options. With-
out this code, all the options below become
invalid.
K RTK
RTK processing enabled. Corrections gener-
ated in RTCM2.3, RTCM3.0, CMR or CMR+
format.
F FASTOUTPUT 20-Hz data output rate enabled
Z MODEM GSM/GPRS modem enabled
S GLONASS GLONASS enabled
P GNSSL2 L2 tracking enabled
M RTK2
RTK using a proprietary data format (ATOM,
DBEN or LRK) enabled.
Required for a base only generating data in
ATOM proprietary format.
L RTK3
Limited RTK range enabled for a rover.
Also gives full RTK capability for a base.
N STA RTK base enabled
O GALILEO Galileo tracking enabled
Q GNSSL5 L5 tracking enabled