Spectra Precision ProMark 800 Reference Manual - Manual (Page 274)

262
Query Command Library
Parameters
None.
Response Format Syntax
$PASHR,ANP,OWN,s1,s2,s3*cc
Parameters
Example $PASHQ,ANP,OWN
$PASHR,ANP,OWN,ASH802147,201143125*30
Relevant Set
Command
$PASHS,ANP,OWN
ANP,RCV: Antenna Name and Offsets of Received Base
Function This command queries the receiver for the antenna name and
offsets of the received base.
Command Format Syntax
$PASHQ,ANP,RCV[*cc]
Response Format Syntax
$PASHR,ANP,RCV,s1,f2,f3,f4,f5,f6,f7*cc
Parameters
Example $PASHQ,ANP,RCV
Parameter Description Range
s1 Name of the local antenna 31 characters max.
s2 Antenna serial number 31 characters max.
Antenna setup ID 0-255
*cc Checksum *00-*FF
Parameter Description
s1 Antenna name, “NONE” if non name received for the base antenna.
f2 L1 North offset, in mm
f3 L1 East offset, in mm
f4 L1 Up offset, in mm
f5 L2 North offset, in mm
f6 L2 East offset, in mm
f7 L2 Up offset, in mm
*cc Checksum