Spectra Precision ProMark 800 Reference Manual - Manual (Page 214)

202
Set Command Library
Example
Setting GGA message on Bluetooth port at 1-second output
rate:
$PASHS,NME,GGA,C,ON,1*01
Comments • For ALM messages, the f4 parameter can only take an
integer value of seconds (by default 3600) and refers to
the interval between messages related to the same
satellite and with the same content.
• For a given satellite, the ALM messages are therefore
renewed every “x” seconds (x=f4), or following a change
in the message content (“on change”), whichever occurs
first.
• ALM messages cannot be output more than once over a
given period of 1 second.
Relevant Query
Command
$PASHQ,NMO
See also $PASHS,NME,PER
NME,ALL: Disabling All NMEA and NMEA-Like Messages
Function This command is used to disable all NMEA messages and
NMEA-like messages currently enabled on the specified port.
Command Format Syntax
$PASHS,NME,ALL,c1,OFF[*cc]
LTN Latency
POS Position
PTT 1 PPS time tag
RRE Residual error
SAT Satellite status
SGA Galileo satellite status
SGL GLONASS satellite status
SGP GPS and SBAS satellite status
USR User message (see $PASHS,USR,TYP)
VEC Baseline vector
Data Description