Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 89)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 75
53-1001945-01
show
2
spanning-tree
Common to all modes
Syntax
show spanning-tree mst
[config|detail (interface){|fe|ge <1-4>|sa <1-4>|tunnel <1-32> |vlan
<1-4094>}|instance <1-15>(interface){|fe|ge <1-4>|sa <1-4>|tunnel <1-32>
|vlan <1-4094>}]
Parameters
Example
RFS7000>show spanning-tree mst config
%
% MSTP Configuration Information for bridge 1 :
%------------------------------------------------------
% Format Id : 0
% Name : My Name
% Revision Level : 0
% Digest : 0xAC36177F50283CD4B83821D8AB26DE62
%------------------------------------------------------
RFS7000>
RFS7000>show spanning-tree mst detail interface ge 3
% Bridge up - Spanning Tree Enabled
% CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768
% Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20
config Displays MSTP configuration information.
detail (interface)
{WORDName>|gefe|geme1 <1-4>|
sa <1-4>|tunnel <1-32> |
vlan <1-4094>} Displays detailed interface information.
•
WORD - Interface name
•
ge - GigabitEthernet interface
•
me1 - FastEthernet interface
•
sa - StaticAggregate interface
•
vlan - VLAN
•
IF Name – Interface name.
•
fe – FastEthernet interface.
•
ge <1-4> – GigabitEthernet interface.
•
sa <1-4> – StaticAggregate interface.
•
tunnel <1-32> – Tunnel interface.
•
vlan <1-4094> – VLAN interface.
instance (interface <1-15>)
{Name>WORD|fege|geme1
<1-4>|
sa <1-4>|tunnel <1-32> |
vlan <1-4094>} Displays instance information.
•
WORD - Interface name
•
ge - GigabitEthernet interface
•
me1 - FastEthernet interface
•
sa - StaticAggregate interface
•
vlan - VLAN
•
IF Name – Interface name.
•
fe – FastEthernet interface.
•
ge <1-4> – GigabitEthernet interface.
•
sa <1-4> – StaticAggregate interface.
•
tunnel <1-32> – Tunnel interface.
•
vlan <1-4094> – VLAN interface.