Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 530)

516 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
multicast-packet-limit
Wireless Configuration Commands
Use this command to a configure multicast packet limit per second for a VLAN.
Syntax
multicast-packet-limit <0-128> (<1-4094>|)
Parameters
Example
RFS7000(config-wireless)#multicast-packet-limit 120 50
RFS7000(config-wireless)#multicast-packet-limit
RFS7000(config-wireless)#multicast-packet-limit 120 1,10,25
RFS7000(config-wireless)#multicast-packet-limit
<0-128>
[<1-4094 | ] Multicast packet limit per second.
•
<1-4094> – Single VLAN ID (1-4094) that the new limit applies to.
•
– A list (1,3,7) or range (3-7 ) of VLAN IDs.