Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 525)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 511
53-1001945-01
Wireless Configuration Commands
20
mac-auth-local
Wireless Configuration Commands
Use this command to configure the local MAC authentication list.
Syntax
mac-auth-local <1-1000> (allow|deny|rate-limit)
mac-auth-local <1-1000> (allow)(Starting MAC Address)(Ending MAC Address)
[WORD|not-mapped]{WORD|zone [<1-48>|default|unknown]}
mac-auth-local <1-1000> (deny)(Starting MAC Address)(Ending MAC Address)
[WORD|not-mapped]{WORD|zone [<1-48>|default|unknown]}
mac-auth-local <1-1000> (rate-limit)[wired-to-wireless|wireless-to-wired]
<100-1000000>
Parameters
<1-1000> Entry for mac-auth-local .
allow Allows mobile units that match this rule to associate.
•
Starting MAC Address – Starting MAC address in AA-BB-CC-DD-EE-FF format.
•
Ending MAC Address – Ending MAC address in AA-BB-CC-DD-EE-FF format.
•
Range/List of WLAN IndicesWORD – A list (e.g.: 1,3,7) or range (e.g.: 3-7) of
WLAN indices.
•
not-mapped – An unmapped row.
•
WORD – Optional radio description substring.
•
zone (<1-48>|default|unknown) – Optional GeoFencing location
zone for devices matching this ACL rule
•
<1-48> – administrator defined zone-id.
•
default – The user is located within the site in the default zone
•
unknown – If the users location is currently unknown or out of bounds of
the site.
deny Denies association to mobile units that match this rule.
•
Starting MAC Address – Starting MAC address in AA-BB-CC-DD-EE-FF format.
•
Ending MAC Address – Ending MAC address in AA-BB-CC-DD-EE-FF format.
•
WORD – A list (e.g.: 1,3,7) or range (e.g.: 3-7) of WLAN indices.
•
not-mapped – An unmapped row.
•
WORD – Optional radio description substring.
•
zone (<1-48>|default|unknown ) – Optional GeoFencing location zone for
devices matching this ACL rule
•
<1-48> – administrator defined zone-id.
•
default – The user is located within the site in the default zone
•
unknown – If the users location is currently unknown or out of bounds of
the site.
rate-limit Sets the rate limit for this acl.
•
wired-to-wireless <100-1000000> – down link direction - from network to
wireless client.
•
wireless-to-wired <100-1000000> – up link direction - from wireless client to
network.
•
<100-1000000> – rate in the range of <100-1000000> kbps.