Show – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 170
156
Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Priv Exec Command
4
show
Use this command to show currently running system information.
Syntax
show
Parameters
aap-wlan-acl [<1-256>|all]
Displays wlan based acl.
•
<1-256> – The WLAN Id. This displays the ACL attached to the WLAN ID specified
by the <1-266> value.
•
all – Displays the ACLs attached to all WLANs.
aap-wlan-acl-stats
Displays IP filtering wlan based statistics
access-banner
Displays access banner.
access-list [<1-99>|
<100-199>|<1300-1999>|
<2000-2699>]WORD]
Displays details of the specified access list.
•
<1-99> – IP standard access list
•
<100-199> – IP extended access list
•
<1300-1999> – IP standard access list (extended range)
•
<2000-2699> – IP extended access list (extended range)
•
WORD – name of ACL
aclstats [access-list|vlan]
Displays ACL statistics information.
•
access-list [<1-99>| <100-199>| <1300-1999>|<2000-2699>|WORD] –
configure access list
•
<1-99> – IP standard access list
•
<100-199> – IP extended access list
•
<1300-1999> – IP standard access list (extended range)
•
<2000-2699> – IP extended access list (extended range)
•
WORD – name of ACL
•
vlan – Vlan interface
alarm-log
[<1-65535>|acknowledged|
all|count|new|severity-to-lim
it>
Displays all alarms currently in the system.
•
<1-65535> – Displays details of specific alarm id.
•
acknowledged – Displays acknowledged alarms currently in the system.
•
all – Displays all alarms currently in the system.
•
count – Displays count of alarms currently in the system.
•
new – Displays new alarms currently in the system.
•
severity-to-limit – Displays all alarms with specified or higher severity.
audit-log-filters
Displays audit log filter rules.
autoinstall[status]
Displays autoinstall configuration.
•
status – Displays status of autoinstall.
boot
Displays the boot configuration.
clock
Displays the system clock.
commands
Displays the command lists.