Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 237)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 223
53-1001945-01
Global Configuration Commands
5
running-config
[full(include-factory)] Displays the current running configuration.
•
full – Displays full configuration.
•
include-factory – Include factory defaults.
NOTE: If the AP / MU locationing configuration has non default parameters, it shows
up here.
securitymgr Displays securitymgr parameters.
service-list Displays list of services.
sessions Displays current active open connections.
snmp (user) Displays SNMP engine parameters.
•
user [snmpmanager|snmpoperator|snmptrap] – snmp user to display
information for.
•
snmpmanager – Displays manager information.
•
snmpoperator – Displays operator information.
•
snmptrap – Displays trap information.
snmp-server (traps) Displays SNMP engine parameters.
traps – Displays Trap enable flags.
spanning-tree (mstp) Displays spanning tree information.
•
mst [configuration|detail|instance] – Displays MST information.
•
configuration – Displays MST configuration information.
•
detail – Displays detailed information of MST.
•
instance <1-15>– Displays information.for the instance of ID <1-15>
value.
startup-config Displays contents of startup configuration.
static-channel-group Displays static channel group membership.
terminal Displays terminal configuration parameters.
timezone Displays the timezone.
upgrade-status Displays the last image upgrade status.
users Displays information about terminal lines.
version Displays software and hardware version details.