Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 185
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
171
53-1001945-01
Global Configuration Commands
5
aaa
Use this command to configure current Authentication,Authorization and Accounting (aaa) login
settings.
Syntax
aaa [authentication|nas|vpn-authentication]
aaa authentication login default [local (radius)|radius (local)]
aaa nas
aaa vpn-authentication [primary|secondary]
Parameters
Usage Guidelines
Use AAA login to determine whether management user authentication must be performed against
a local user database or an external RADIUS server.
Example
RFS7000(config)#username Brocadeadmin password Brocade
RFS7000(config)#username Brocadeadmin privilege superuser
RFS7000(config)#aaa authentication login default local
RFS7000(config)#
authentication
Authentication configuration parameters.
•
login – Sets an authentication list for logins.
•
default – The default authentication list.
•
local (radius) – Uses the local user database.
•
radius (local) – Uses an external RADIUS server.
nas
Identifies the NAS originating the RADIUS access request (for VPN only).
WORD – A strting of up to 64 characters.
vpn-authentication
[primary|secondary]
[0|2|WORD]
Configures the RADIUS server.
•
[primary|secondary] – Primary / Secondary RADIUS server.
•
IP Address – RADIUS server’s IP Address.
•
key – The RADIUS client preshared key. This must match with RADIUS server.
•
0 – Password is specified UNENCRYPTED.
•
2 – Password is encrypted with password-encryption secret.
•
word – Shared secret upto 32 characters.