Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 229)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 215
53-1001945-01
Global Configuration Commands
5
Parameters
Example
RFS7000(config)#service dhcp
RFS7000(config)#
RFS7000(config)#service radius restart
RFS7000(config)#
advanced-vty Enables the advanced mode vty interface.
dhcp Enables the DHCP Server.
diag [enable|limit|
period<100-30000>] Enables diagnostic service.
•
enable – Enables service diagnostics.
•
limit – Diagnostic limit command.
•
buffer [128|128k|16k|1k|256|2k|32|32k|4k|512|64|64k|8k] –
Buffer usage warning limit set in bytes.
•
fan <1-3> – Sets the fans speed limit for the selected fan number.
•
filesys [etc2|flash|var] – File system freespace limit.
•
inodes [etc2|flash|var] –Sets file system inode limit.
•
load [01|05|15]– Sets agregate processor load during the previous
minutes set using the option provided.
•
maxFDs <0-32767> – Sets maximum number of file descriptors.
•
pkbuffers <0-65535> – Sets packet buffer head cache.
•
procRAM < 0.0-100.0> – Sets RAM space to be used by the process.
•
ram <0.0-25.0> – Sets free RAM space.
•
routecache <0-65535> – Sets IP route cache usage.
•
temperature <1-68> – Sets temperature limit.
•
period <100-30000>– Sets diagnostics period in milliseconds. Default value is
set to 1000 milliseconds.
password-encryption (secret) Encrypts passwords.
•
secret – Encrypts passwords in secret phase.
pm
(sys-restart) Process Monitor.
•
sys-restart – Enables PM to restart the system when a processes fails.
NOTE: The process restart is one count less than what is configured.
radius [(restart|test)] Enables the RADIUS server.
•
restart – Restarts the radius server with updated configuration.
•
test – Tests the radius server with user parameters.
•
– radius server IP address.
•
WORD – radius server hostname.
set
(command-history
<
10-300>
|
reboot-history<10-100>|
upgrade-history<10-100>
)
Sets service parameters.
•
command-history – Sets the size of the command history (default: 200).
•
reboot-history – Sets the size of the reboot history (default: 50).
•
upgrade-history – Sets the size of the upgrade history (default: 50).
show cli Shows the CLI tree of the current mode.
terminal-length <0-512> System wide terminal length configuration. Select a value between 0 - 512. This sets
the number of lines of VTY (0 means no line control).
watchdog Enables the watchdog feature.