Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 235)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 221
53-1001945-01
Global Configuration Commands
5
•
name-server – Displays the ip configuration of the specified DNS nameserver.
•
nat [interfaces|translations] – Displays the configuration of Network Address
Translations.
•
interfaces – Displays the NAT configuration on the interfaces.
•
translations [inside|outside|verbose] – Displays NAT translations.
•
Inside – Inside
•
Outside – outside
•
destination –
•
source –
•
route [A.B.C.D|A.B,C.D/M|detail] – Displays IP routing table.
•
A.B.C.D – Network in the IP routing table to display.
•
A.B.C.D/M – IP prefix
•
detail – Displays IP routing table in detail.
•
routing – Displays status of routing.
•
ssh – Displays status and configuration of the SSH server.
ldap [configuration] Displays the LDAP server configuration.
•
configuration [primary|secondary] – Specifies LDAP configuration parameters.
•
primary – Displays the configuration of primary LDAP server.
•
secondary – Displays the configuration of secondary LDAP server.
licenses Displays installed licenses details.
logging Displays logging configuration and buffer data.
mac
[access-group|access-list] Displays MAC access-list assignment details.
•
access-group – Displays Mac ACLs attached to an ineterface.
•
access-list – Lists Mac access lists.
mac-address-table Displays the MAC address table.
mac-name Displays the configured MAC name details.
management Displays L3 Management Interface name details.
mobility
[event-log|forwarding|globa
l|
mobile-unit|peer|
statistics] Displays mobility parameters.
•
event-log [mobile-unit|peer] – Displays event logs.
•
mobile – Displays station event-logs.
•
peer – Displays peer event-logs.
•
forwarding – Displays mobile-units in the Forwarding
Plane.
•
– The MAC address of the mobile unit to display.
•
global – Displays Global Mobility parameters.
•
mobile-unit [|detail] – Displays mobile-units in the
mobility database.
•
– The MAC address of the mobile unit to display.
•
detail – Displays detailed information.
•
peer [|detail] – Displays mobility peers.
•
– The IP address of peer.
•
detail – Displays detailed information.
•
Statistics – Displays mobility statistics.
•
– The MAC address of the mobile unit to display.