Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 198)

184 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
Parameters
ipsec
(security-association|
transform-set) Configures IPSEC policies.
•
security-association – Security association parameter used to define its
lifetime.
•
lifetime (kilobyte | seconds) – The lifetime of IPSEC security association. It
can be defined in either:
kilobytes – Volume-based key duration. Minimum is 500 KB and
maximum is 2147483646 KB.
seconds – Time-based key duration. Minimum is 90 seconds and
maximum is 2147483646 seconds
•
transform-set [set name] – Uses the crypto ipsec transform-set command to
define the transform configuration for securing data.
•
ah-sha-hmac
•
esp-3des
•
esp-aes
•
esp-aes-192
•
esp-aes-256
•
esp-sha-hmac
The transform-set is then assigned to a crypto map using the map’s set
transform-set command. See
Crypto-map Instance on page 281 .
isakmp
[client|keepalive|key|
peer|policy] Configure Internet Security Association and Key Management Protocol (ISAKMP)
policy.
•
client configuration (group) (default) – This leads to
config-crypto-group
instance.
For more details see Crypto-group Instance on page 251 .
•
keepalive <10-3600> – Sets a keepalive interval for use with remote peers. It
defines the number of seconds between DPD messages.
•
key [0|2|word] [address|hostname] – Sets a pre-shared key for remote peer.
•
0 – Password is specified UNENCRYPTED.
•
2 – Password is encrypted with password-encryption secret
•
WORD – User provided password.
•
address – Defines shared key with IP address.
•
– The peer IP address.
•
hostname – Defines shared key with hostname.
•
peer [address|dn|hostname] – Sets a remote peer.
•
address – The IP address acts as an identity of remote peer.
•
dn – The identity of remote peer is Distinguished Name.
•
hostname – The identity of remote peer is hostname.
•
policy <1-10000> – Set policy for an ISAKMP protection suite.
key
[export|generate|import|
zeroize] Authentication key management.
•
export rsa URL [sftp] – Exports a keypair related configuration.
•
generate rsa <1024-2048> – Generates a keypair.
•
<1024-2048> – Size of keypair in bit.
•
import rsa URL [tftp|ftp] – Imports keypair related configuration.
•
zeroize rsa – Deletes a keypair.
•
rsa – RSA keypair identifier associated with keypair.
•
URL – URL for sending the key to. It can be one of the following:
•
sftp://@/path/file