Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 144)

130 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Priv Exec Command
4
Parameters
aclstats Clears ACL statistics.
arp-cache Clears the Arp cache.
alarm-log Clears alarm-log.
•
<1-65535> - clears specific alarm id.
•
acknowlwedged - clears acknowleged alarms.
•
all - clears all alarms.
•
new - clears new alarms.
counters
[all|bridge|interface|firewal
l|igmp-snooping|
router|thread] Clears counters.
•
all – Clears all counters.
•
bridge – Clears bridge counters.
•
interface – Clears interface counters.
•
interface name – The interface to clear the counters for.
•
all – Clears all interfaces’ counters.
•
ge <1-4>– Clears counters for the Gigabit Ethernet interface of <1-4>
value.
•
me1 – Clears counters for Fast Ethernet interface
•
sa –Clears counters for Static Aggregate interface of <1-4> value
•
vlan – Clears counters for VLAN with the ID <1-4094> value.
•
firewall - clears firewall counters
•
igmp-snooping - clears igmp snooping countersrouter – Clears router counters.
•
thread – Clears per-thread counters.
crypto [ipsec|isakmp] (sa)
Clears encryption subsystem.
•
ipsec – Flushes IPSec SA
•
sa – Clears all IPSec SA's.
•
A.B.C.D – Clear all IPSec SA's for a given peer
•
isakmp – Flushes the ISAKMP database.
•
sa – Clears all IKE SA’s
•
A.B.C.D – Clears all IKE SA’s for a given peer
crypto-error-log Perform clear crypto error log
crypto-log Perform clear crypto log
ip (dhcp) (binding)
[*|A.B.C.D]) Clears the Internet Protocol (IP) of DHCP.
•
dhcp – DHCP Server configuration.
•
bindings – DHCP address bingings.
•
* – Clears all bindings.
•
A.B.C.D – Clears specific bindings.
•
all – Clears all bindings.
•
pmtu-discovery-blackhole-cache - clear path-MTU discovery blackhole cache.
logging Modifies message logging facilities.
dosstats DOS statistics.