Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 43)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 29
53-1001945-01
Common commands
2
limit (filesys) [etc2|flash|var] Use this parameter to set the file system freespace limit. Select the
freespace limit for the following sub context:
•
etc2
•
flash
•
ram
limit (inodes)
[etc2|flash|var] File system inode limit. Select the freespace limit for the following sub context:
•
etc2
•
flash
•
ram
limit (load) [1|15|5] Configures the aggregate processor load. Select from the following submodes:
•
1 – Aggregate processor load during the previous minute.
•
15 – Aggregate processor load during the previous 15 minute.
•
5 – Aggregate processor load during the previous 5 minute.
limit (maxFDs) <0-32767> Configures the maximum number of file descriptors. Set between 0 to 32767 file
descriptors.
limit (pkbuffers)
<0-65535> Configures the packet buffer cache limit. Set between 0 to 65535 as the buffer
cache limit.
limit (procRAM)
< 0.0-100.0> Defines the RAM space used by a process. Set the percentage of RAM space used by
the processor between 0 to 100.0 percent.
limit (ram) <0.0-25.0> Configures the free space for the RAM. Configure the free space between 0.0 and
100.0 percent.
limit (routecache)
<0-65535> Defines the IP route cache usage. Define a value between 0 - 65553.
limit (temperature) <1-8> Sets the switch temperature sensor. Set as many as 8 temperature sensors.
period <100-30000> Sets the diagnostic period.
•
<100-30000> – Configures the diagnostics period. Set a value between
100-30000 milli seconds. The default value is 1000 milliseconds.
service (diag-shell)
diag-shell Provide diag shell access
service (encrypt)
encrypt(secret) 2 LINE Encrypts passwords with a secret phrase using SHA256-AES256 encryption.
service (ip)
ip (igmp) Internet Group Management Protocol
snooping IGMP Snooping
robustness-variable
<1-7> Robustness count
service (locator)
locator Flash all LEDS to locate the switch visually.
service (pm)
pm Process Monitor