Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 562)

548 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
wlan<1-256> nac-mode [bypass-nac-except-include-list|do-nac-except-exclude-
list|none]
wlan<1-256> nac-server [primary|secondary|timeout]
wlan<1-256> nac-server [primary|secondary][A.B.C.D (auth-port) <1024-65535>|
radius-key (0|2|Shared Secret)]
wlan<1-256> nac-server [timeout] <1-300>
wlan <1-256> inactivity-timeout <60-86400>
wlan <1-256> ip (arp|dhcp){rate-limit<1-1000000>|trust}
wlan <1-256> mobility (enable)
wlan <1-256> qos(classification|mcast-with-dot11i (enable)|mcast1 |
mcast2|prioritize-voice|rate-limit|svp|weight <1-10>|wmm)
wlan <1-256> qos
classification(background|best-effortlow|normal|video|voice|weight <1-10>|
wmm)
wlan <1-256> qos (rate-limit){wired-to-wireless <100-1000000>|wireless-to-wired
<100-1000000>}
wlan <1-256> qos wmm(8021p|background|best-effort|dscp|video|voice)
(aifsn|cw|txop-limit|acm)
wlan <1-256> radius(accounting|authentication-protocol|dscp|
dynamic-authorization|dynamic-vlan-assignment|mac-auth-format|
mobile-unit|reauth|server)
wlan <1-256> radius accounting(mode|server|timeout)
wlan <1-256> radius accounting mode(start-interim-stop(interval)
<60-3600>|start-stop|stop-only|)
wlan <1-256> radius accounting server [primary|secondary]{A.B.C.D|radius-key}
wlan <1-256> radius accounting timeout <1-60300> retransmit<1-100>
wlan <1-256> radius authentication-protocol(chap|pap)
wlan <1-256> radius dscp <0-63>
wlan <1-256> radius dynamic-authorization (enable)
wlan <1-256> radius dynamic-vlan-assignment (enable)
wlan <1-256> radius mac-auth-format [middle-dash|no-delim|pair-colon|
pair-dash|quad-dot]
wlan <1-256> radius mobile-unit (time-out <1-300>)(retransmit <1-100>)
wlan <1-256> radius server(primary|secondary|timeout)
wlan <1-256> radius server(primary|secondary){A.B.C.D|radius-key}
wlan <1-256> radius server timeout <1-300> retransmit<1-100>
wlan <1-256> smart-scan-channels {|add|remove}
wlan<1-256> (set-vlan-user-limit)[<1-4094>|VLAN]
wlan <1-256> storm-control [bcast|mcast|ucast] (rate-limit <1-1000000>)
wlan <1-256> syslog (accounting) server port
wlan <1-256> url-log (enable)
wlan <1-256> vlan [<1-4094>|VLAN]
wlan <1-256> wep128(key< 1-4> (ascii|hex[0|2|WORD])|phrase(LINE)|
wep-default-key <1-4>)