Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 385)

Brocade Mobility RFS7000-GR CLI Reference Guide 371
53-1001945-01
Extended ACL Config Commands
14
protocol-list List of protocols
radius RADIUS configuration commands
redundancy-group Display redundancy group parameters
redundancy-history Display state transition history of the switch.
redundancy-members Display redundancy group members in detail
role Configure role parameters
rtls Real Time Locating System command
running-config Current Operating configuration
securitymgr Securitymgr parameters
sessions Display current active open connections
smtp-notification Display SNMP engine parameters
snmp Display SNMP engine parameters
snmp-server Display SNMP engine parameters
spanning-tree Display spanning tree information
startup-config Contents of startup configuration
static-channel-group static channel group membership
terminal Display terminal configuration parameters
timezone Display timezone
traffic-shape Display traffic shaping
upgrade-status Display last image upgrade status
users Display information about currently logged in users
version Display software & hardware version
virtual-ip IP Redundancy Feature
wireless Wireless configuration commands
wlan-acl wlan based acl
RFS7000(config-ext-nacl)#show
RFS7000(config-ext-nacl)#show access-lis t
Extended IP access list 101
deny ip 192.168.1.0/24 192.168.2.0/24 rule-precedence 10
permit ip any any rule-precedence 20
Extended IP access list 110
deny ip host 192.168.1.95 host 192.168.2.98 log rule-precedence 10
permit ip any any rule-precedence 20
Extended IP access list Brocade
deny tcp 192.168.2.0/24 192.168.1.0/24 rule-precedence 10
permit ip any any rule-precedence 20
RFS7000(config-ext-nacl)#