Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 477)

Brocade Mobility RFS7000-GR CLI Reference Guide 463
53-1001945-01
RADIUS Configuration Commands
19
no
group
Use this command to negate a command or set defaults.
Syntax
no(policy|rad-user|rate-limit)
no policy(day|time|vlan|wlan)
no policy wlan(<1-32256>|all)<1-32256>
Parameters
Example
RFS7000(config-radsrv-group)#no policy day
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no policy time
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no policy vlan
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no policy wlan 2 5
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no rad-user all
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no service radius
%%Info: Radius service stopped...
RFS7000(config-radsrv-group)#
policy RADIUS group access policy configuration.
day Resets the access policy day for this group.
time Configures access policy time for this group.
vlan VLAN ID for this group.
wlan Configures WLAN access policy for this group.
<1-32256> WLAN Range.
all Removes allowed WLANs.
rad-user Removes users from this group.
WORD Existing user name in this group.
all Removes all users from this group.
rate-limit Negates a command or set its defaults.
wired-to-wireless up link direction - from wireless client to network
wireless-to-wired down link direction - from network to wireless client