Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 421)

Brocade Mobility RFS7000-GR CLI Reference Guide 407
53-1001945-01
DHCP Config Commands
17
address
config-dhcp-class
Use this command to set an address range for a DHCP class in a DHCP server address pool.
Syntax
address (range) (low IP Address) (high IP Address)
Parameters
Example
RFS7000(config-dhcp-class)#address range 11.22.13.14 11.22.33.56
RFS7000(config-dhcp-class)#
range (low IP Address) (High
IP Address) Address range for the DHCP class.
• A.B.C.D – Low IP Address.
• A.B.C.D – High IP Address.