Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 587)

Brocade Mobility RFS7000-GR CLI Reference Guide 573
53-1001945-01
RTLS Config Commands
21
show
RTLS Config Commands
Use this command to display current system information.
Syntax
show
show rtls [aeroscout|espi|filter|ekahau|reference-tags|
rfid|site|sole|tags|zone]
Parameters
Usage Guidelines
Use ? at the end of each option until the final configuration is displayed.
Example
RFSwitch(config-rtls)#show ?
access-list Internet Protocol (IP)
aclstats Show ACL Statistics information
alarm-log Display all alarms currently in the system
autoinstall autoinstall configuration
banner Display Message of the Day Login banner
boot Display boot configuration.
clock Display system clock
commands Show command lists
crypto encryption module
debugging Debugging information outputs
dhcp DHCP Server Configuration
environment show environmental information
file Display filesystem information
firewall Wireless firewall
ftp Display FTP Server configuration
history Display the session command history
interfaces Interface status
ip Internet Protocol (IP)
ldap LDAP server
licenses Show any installed licenses
logging Show logging configuration and buffer
mac Internet Protocol (IP)
mac-address-table Display MAC address table
mac-name Displays the configured MAC names
management Display L3 Managment Interface name
mobility Display Mobility parameters
ntp Network time protocol
password-encryption password encryption
port Physical/Aggregate port interface
port-channel Portchannel commands
privilege Show current privilege level
protocol-list List of protocols
radius RADIUS configuration commands
role Configure role parameters
redundancy Display redundancy group parameters
? Suffix ? to the parameter to view its options and their related configuration
details.