Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 581)

Brocade Mobility RFS7000-GR CLI Reference Guide 567
53-1001945-01
RTLS Config Commands
21
ekahau
RTLS Config Commands
Syntax
ekahau [enable|engine ip port|multicast-listen-addr]
Parameters
Use
[no] enable
and
[no] engine
to undo the ekahau RTLS engine configuration
and disable it.
Example
RFS7000(config-rtls)#ekahau enable
RFS7000(config-rtls)#
RFS7000(config-rtls)#ekahau engine ip 10.1.1.1 port 1001
RFS7000(config-rtls)#
RFS7000(config-rtls)#ekahau multicast-listen-addr 01-18-8E-00-00-00
RFS7000(config-rtls)#
enable Enables and configures external ekahau RTLS engine
engine ip C.D> port Configures the IP address and port number of the external ekahau RTLS
engine
•
ip C.D> – Configures external location engine IP address
•
port <1000-9000> – Configure external location engine port
multicast-listen-addr
Configures multicast MAC address to which ekahau tags packets are destined
•
– Multicast MAC address