Service – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual

Page 411

Brocade Mobility RFS7000-GR CLI Reference Guide

397

53-1001945-01

MAC Extended ACL Config Commands

service

Use this command to invoke service commands to troubleshoot or debug

(config-if)

instance

configurations.

Syntax

service(show)(cli)

Parameters

Example

RFS7000(config-ext-macl)#service show cli

MAC Extended ACL Config mode:

+-clrscr [clrscr]

+-deny

+-XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX

+-XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX [(deny|permit|mark (8021p <0-7> | tos

<0-255>))(XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX | host XX:XX:XX:XX:XX:XX |

any)(XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX | host XX:XX:XX:XX:XX:XX | any)(vlan

<1-4095> | dot1p <0-7> |) (type (<1-65535> | ip | ipv6 | arp | wisp |

8021q | rarp | aarp | appletalk | ipx ) |)(rule-precedence <1-5000> |)]

+-dot1p

+-<0-7> [(deny|permit|mark (8021p <0-7> | tos

<0-255>))(XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX | host XX:XX:XX:XX:XX:XX |

any)(XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX | host XX:XX:XX:XX:XX:XX | any)(vlan

<1-4095> | dot1p <0-7> |) (type (<1-65535> | ip | ipv6 | arp | wisp |

8021q | rarp | aarp | appletalk | ipx ) |)(rule-precedence <1-5000> |)]

+-rule-precedence

+-<1-5000> [(deny|permit|mark (8021p <0-7> | tos

<0-255>))(XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX | host XX:XX:XX:XX:XX:XX |

any)(XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX | host XX:XX:XX:XX:XX:XX | any)(vlan

<1-4095> | dot1p <0-7> |) (type (<1-65535> | ip | ipv6 | arp | wisp |

8021q | rarp | aarp | appletalk | ipx ) |)(rule-precedence <1-5000> |)]

.................................................................................

RFS7000(config-ext-macl)#

show (cli)

Shows CLI tree of current mode.