Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 441)

Brocade Mobility RFS7000-GR CLI Reference Guide 427
53-1001945-01
DHCP Config Commands
17
next-server
DHCP Config Commands
Use this command to configure the IP address of the next server in the boot process.
Syntax
next-server
Parameters
Example
RFS7000(config-dhcp)#next-server 2.2.2.22
RFS7000(config-dhcp)#
next-server addressA.B.C.D> Defines the next server in the boot process.
•
– Server's IP address.