Service – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 494
480
Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
RADIUS Configuration Commands
19
service
Use this command to invoke service commands to troubleshoot or debug
(config-radsrv)
instance configurations. This command is also used to enable the RADIUS Server.
Syntax
service (show) (cli)
Parameters
Example
RFS7000(config-radsrv)#service show cli
Radius Configuration mode:
+-authentication
+-data-source
+-ldap [authentication data-source (local|ldap)]
+-local [authentication data-source (local|ldap)]
+-eap-auth-type
+-all [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|peap-gtc|peap-mschapv2|tls|all)]
+-peap-gtc [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|peap-gtc|peap-mschapv2|tls|all)]
+-peap-mschapv2 [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|peap-gtc|peap-mschapv2|tls|all)]
+-tls [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|peap-gtc|peap-mschapv2|tls|all)]
+-ttls-md5 [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|peap-gtc|peap-mschapv2|tls|all)]
+-ttls-mschapv2 [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|peap-gtc|peap-mschapv2|tls|all)]
+-ttls-pap [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|peap-gtc|peap-mschapv2|tls|all)]
+-ca
+-trust-point
+-WORD [ca trust-point WORD]
+-clrscr [clrscr]
+-crl-check
+-enable [crl-check enable]
+-do
+-LINE [do LINE]
+-end [end]
+-exit [exit]
+-group
+-WORD [group WORD]
+-help [help]
.................................................................................
.................................................................................
RFS7000(config-radsrv)#
show (cli)
Shows running system information.