Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 205)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 191
53-1001945-01
Global Configuration Commands
5
ip
Global Configuration Commands
Use this CLI command to configure a selected Internet Protocol.
NOTE
Use an
ip access-list extended
command to move to the
(config-ext-nacl)
instance. For
additional information, see Extended ACL Instance on page 351 .
Use an
ip access-list standard
command to move to the
(config-std-nacl)
instance. For
additional information, see
Standard ACL Instance on page 373 .
Use an
ip dhcp pool (pool name)
command to move to the
(config-dhcp)
instance. For
additional information, see DHCP Server Instance on page 401 .
Syntax
ip(access-list|default-gateway|dhcp|domain-lookup|domain-name|http|local|
name-server|nat|route|routing|ssh)
ip access-list
[extended{<100-199|<2000-2699>|WORD}|standard{<1-99>|<1300-1999>|WORD}]
ip default-gateway(A.B.C.D)
ip dhcp [bootp|class|excluded-address|option|ping|pool|restart]
ip dhcp bootp(ignore)
ip dhcp class (class name)
ip dhcp excluded-address(A.B.C.D)
ip dhcp option(option name)
ip dhcp ping(timeout <1-10>)
ip dhcp pool(pool name)
ip dhcp restart
ip domain-lookup
ip domain-name(WORD)
ip http [secure-server|secure-trustpoint(WORD)|server(localhost)]
ip local [pool(default {low-ip-address(A.B.C.D)})]
ip name-server(A.B.C.D)
ip nat source list
(interface)[ (overload)|VLAN (VID)]
ip nat static
[ <1-65535>] <1-65535>
ip route(A.B.C.D|A.B.C.D/M)
ip routing
ip ssh(port|rsa)
ip ssh(port(<0-65536>))
ip ssh [rsa {keypair-name(WORD)}]