Agilent Technologies N9010A - Manual (Page 94)

94 Chapter 4
Option B25 - 25 MHz Analysis Bandwidth
Specifications Affected by Analysis Bandwidth
Specifications Affected by Analysis Bandwidth
The specifications in this chapter apply when the 25 MHz path is in use. In IQ Analyzer, this will occur
when the IF Path is set to 25 MHz, whether by Auto selection (depending on Span) or manually.
Specification Name Information
IF Frequency Response See specifications in this chapter.
IF Phase Linearity See specifications in this chapter.
Spurious and Residual Responses The “Spurious Responses” on page 48 still apply. Further,
bandwidth-option-dependent spurious responses are contained
within this chapter.
Displayed Average Noise Level,
Third-Order Intermodulation and
Phase Noise The performance of the analyzer will degrade by an unspecified
extent when using this bandwidth option. This extent is not
substantial enough to justify statistical process control.